General Description
Using low power CMOS process, the AS1151OD
is designed for low power, high performance omnipolar
detection 3D hall-effect application. The 3D hall IC
integrated an on-chip hall voltage generator for
magnetic sensing, a comparator that amplifiers the hall
voltage, a Chopper amplifier, a Schmitt trigger to
provide switching hysteresis for noise rejection, and a
complementary output. The total power consumption of AS1151OD is
typically less than 1.3uA at 1.8V power supply. AS1151OD is designed to respond to alternating North
and South poles. When the magnetic flux density (B) is
larger than operate point (BOP), the output will be
turned on (low), the output is held until the magnetic
flux density (B) is lower than release point (BRP), then
turn off (high). The device is available in SOT23-3L and SIP-3L
Package and is rated over the -40°C to 125°C. The all
packages are RoHS and Green compliant
Using low power CMOS process, the AS1151OD
is designed for low power, high performance omnipolar
detection 3D hall-effect application. The 3D hall IC
integrated an on-chip hall voltage generator for
magnetic sensing, a comparator that amplifiers the hall
voltage, a Chopper amplifier, a Schmitt trigger to
provide switching hysteresis for noise rejection, and a
complementary output. The total power consumption of AS1151OD is
typically less than 1.3uA at 1.8V power supply. AS1151OD is designed to respond to alternating North
and South poles. When the magnetic flux density (B) is
larger than operate point (BOP), the output will be
turned on (low), the output is held until the magnetic
flux density (B) is lower than release point (BRP), then
turn off (high). The device is available in SOT23-3L and SIP-3L
Package and is rated over the -40°C to 125°C. The all
packages are RoHS and Green compliant
Features
3D (X, Y, Z) Magnetic Flux Switch
Omnipolar Operation, easy to use as output
Input Voltage Range : 1.65V to 5.5V
Micro-power consumption ideal for battery
power applications: 1.3uA/1.8V
Very high sensitivity hall sensor
Low Power CMOS process technology
Chopper stabilization amplifier stage
High Magnetic Sensitivity
Good RF noise immunity
No need pull-up resistor
Small Solution Size
RoHS & Green Compliant
SOT23-3L & SIP-3L Packages
-40℃ to +85 ℃ Temperature Range
Applications
Smart Meter
Cover switch
Contact-less switch
Air Cylinder, Antitheft window, Digital door lock
Water Purifier, Humidifier Bidet
Water Meter, Gas Meter, Watttmeter etc
Washing Machine,Rice Cooker, Refrigerator,
Electronic Dictionary, Digital Camera etc
