General
Description
Using low power CMOS process, the AS1190 is designed for low power, high performance omnipolar detection 3D hall-effect application. The 3D hall IC integrated an on-chip hall voltage generator for magnetic sensing, a comparator that amplifiers the hall voltage, a Chopper amplifier, a Schmitt trigger to provide switching hysteresis for noise rejection, and a complementary output.
The total power consumption of AS1190 is typically less than 1.3uA at 1.8V power supply. AS1190 is designed to respond to alternating North and South poles. When the magnetic flux density (B) is larger than operate point (BOP), the output will be turned on (low), the output is held until the magnetic flux density (B) is lower than release point (BRP), then turn off (high).
The device is available in SOT23-3L and SIP-3L Package and is rated over the -40°C to 125°C. The all packages are RoHS and Green compliant.
Features
● 3D (X, Y, Z) Magnetic Flux Switch
● Omnipolar Operation, easy to use as output
● Input Voltage Range : 1.65V to 5.5V
● Micro-power consumption ideal for battery power applications: 1.3uA/1.8V
● Very high sensitivity hall sensor
● Low Power CMOS process technology
● Chopper stabilization amplifier stage
● High Magnetic Sensitivity
● Good RF noise immunity
● No need pull-up resistor
● Small Solution Size
● RoHS & Green Compliant
● SOT23-3L & SIP-3L Packages
● -40℃ to +85 ℃ Temperature Range
Applications
● Smart Meter
● Cover switch
● Contact-less switch
● Water Meter, Gas Meter, Watttmeter etc
● Washing Machine,Rice Cooker, Refrigerator,Electronic Dictionary, Digital Camera etc
● Contact-less switch
● Air Cylinder, Antitheft window, Digital door lock
● Water Purifier, Humidifier Bidet● Water Meter, Gas Meter, Watttmeter etc
● Washing Machine,Rice Cooker, Refrigerator,Electronic Dictionary, Digital Camera etc
